How to remove the protective glass yourself without damaging the smartphone screen

It can be annoying when you break the protective glass on your smartphone by accident, but taking it off doesn’t have to be difficult. It’s important to know how to remove a screen protector from your phone without damaging the display, whether you want to upgrade to a new one or replace a broken one. We’ll walk you through the process of removing that protective layer in a safe and efficient manner in this guide.

First things first: making sure you have the appropriate equipment and supplies. Usually, all you’ll need is a little perseverance, a plastic card or thin pry tool, and a soft cloth. You can stay clear of common pitfalls and guarantee that the screen on your phone remains flawless by adhering to these easy steps.

Everything from releasing the adhesive to gingerly removing the glass without damaging it will be covered. You can enjoy the bare screen without any damage on your phone or get it ready for a new protector with a little care and the right approach. Let’s get going and complete this task as quickly as we can.

Procedure

Prepare everything you need

Set up your workspace and gather the required tools before you begin taking the protective glass off of your smartphone screen:

• Find the most illuminated and dust-free place in the house;
• You will need a silicone suction cup or improvised means – a map, dental floss, a piece of cardboard or plastic;
• Rubber or non-woven gloves;
• Hair dryer;
• Microfiber cloth;
• LCD monitor cleaner or any alcohol-containing liquid;

Remove the glass using special devices and improvised means

The initial steps are the same regardless of the tool you use to remove broken or old glass:

• Inspect and find the place of least adhesion to the display – where it peels off due to old age, damage or dust;
• Gloves – they are needed to avoid leaving greasy marks on the gadget"s monitor;
• In order for it to come off the screen better – hold the smartphone under a stream of warm air from a hair dryer for 15-20 seconds, without bringing it too close to the display;

Pick it up with a fingernail

Although it’s not the ideal approach, you can use this one if you don’t have any other options:

• Pry up the selected corner of the cracked glass with the pointed tip of your fingernail;
• Try to create an air cushion between the display and the glass, then it will come off quickly and without problems. Especially if the adhesive was only along the edge;
• If it doesn"t work, then pick up one corner and carefully move along the entire circumference;
• You can help yourself with a piece of paper, cardboard or blister folded several times so that the protection does not stick again. Insert objects into the gap and slowly separate the glass;

Suction cup

This device could be yours as a gift if you bought tempered glass from a Chinese website. Especially if it is cracked, it is easy to use for both applying and taking off the unique coating. Of course, a suction cup is available for separate purchase.

• Attach the silicone suction cup to the selected corner of the device and pull it slightly;
• Pick up the edge with a sheet of paper (blister, tip of a plastic knife) so that it does not stick back;
• Carefully pull the suction cup towards you. Do this very carefully – do not damage the touchscreen;
• Try to remove from the entire surface of the monitor at the same time;

Plastic

Using plastic to remove the protective glass is incredibly convenient, and its width makes it possible to perform the process carefully and without risk of damage.

Just relatively thin plastic cards should be removed; not all of them are. For this, any credit card will work.

• Pry up the selected edge and create an air cushion;
• Carefully deepen the plastic over the entire area of ​​​​the protective surface;

Thread

Because you have to use both hands to hold the phone and manipulate the thread at the same time, this method is not very convenient. It ought to be sufficiently strong and thin. A fishing line or beading string can be used.

• Place the gadget in front of you;
• Pull the thread between your fingers;
• Hold the cell phone with the back of your palms – pry up the edge;
• Moving left and right, move to the adjacent corner;
• Carefully move to the middle and further until it completely peels off;

Working with damaged coating

Take extra care when removing any small remnants or cracked coating to avoid damaging the main display’s top layer.

After determining the extent of the damage, begin removing the shield from the edge that is still the most intact. In this instance, it is preferable to use a silicone suction cup and a plastic card simultaneously rather than your fingernail. It will be much simpler to remove the protective surface if the object is wide across the entire monitor.

If the glass is broken, use suction cups to remove the larger pieces first, followed by the smaller ones. Adhesive tape can be used if picking them up is not possible. It is not necessary to apply force to the screen. The motions ought to be fleeting and superficial.

Attempting to "drag" the pieces across the monitor’s surface is risky as well because it could break the screen. Remain patient and keep gathering the adhered pieces repeatedly. Using a microfiber cloth, clean the edges of the remaining broken glass.

After completing every step, use a liquid that contains alcohol to remove any leftover glue!

Glue on the new glass

• Degrease the screen with liquid for cleaning LCD monitors or wipes from the set;
• Remove dust particles from the surface;
• Glue on the protection;

This article contains a description that is more thorough.

It’s not as hard as you might think to remove the protective glass from your smartphone without scratching the screen. To loosen the adhesive, first gently heat the glass with a hairdryer. Then, carefully lift the edges with a thin plastic tool. To guarantee a clean removal and prevent applying pressure to the screen, proceed slowly. You won’t damage your device if you take your time replacing or cleaning the protective glass.

Features of work on different brands of smartphones

Since the iPhone is a pricey device, many owners are hesitant to perform the gluing and removal process themselves. Its unique screen thickness contributes to its strength, and the process of taking off the protection is the same as that of any other phone, including the Honor, Huawei, Samsung Galaxy, and Xiaomi Redmi.

How to avoid damaging the screen

• Do not use sharp, iron objects to remove – needles, pins, paper clips, a stationery or kitchen knife;
• If you can"t hook the edge or it just doesn"t come off well on this side – try starting from another corner;
• Do not apply maximum force to peel the protection off the display;
• Be sure to degrease your hands, or use gloves to leave as few fingerprints as possible;
• Prepare the work area. Especially if you are going to install new glass. Everything should be as clean as possible;
• Do not pull on one corner – you can break the coating and damage the main outer layer of the glass, you need to separate over the entire area of ​​​​the matrix;
• If after the fall and removal the sensor of the main monitor stops responding to touch, contact a specialist at the service center to diagnose the damage. Perhaps the cable has come off, the touchscreen has shifted, or the screen module has completely failed;

It doesn’t have to be difficult to take off your smartphone’s protective glass. By using the appropriate technique and instruments, you can remove the glass securely and without harming your screen. You can make sure that your device stays in perfect condition and is prepared for a new start or the next layer of protection by following the instructions provided.

Always keep in mind to handle your phone with care and to work in a dust-free, clean environment. Being impatient can lead to screen damage or phone damage, so take your time. In order to prevent any accidents, think about getting professional assistance if the safety glass proves to be stubborn.

Removing the protective glass can be a simple and hassle-free process with a little bit of work and the right technique. You can preserve the look and functionality of your smartphone for many years to come if you keep these pointers in mind.

Video on the topic

How to remove broken glass from a smartphone

How to peel off the protective glass from a phone without damaging it

How to remove broken glass safely?

How to remove the protective glass?

Remove the protective glass correctly!

HOW TO REMOVE THE PROTECTIVE GLASS from a phone. How to peel off the protective glass CORRECTLY!