Rules for using electric convectors Atlantic

Electric convectors, which provide a practical and effective means of keeping your space warm, are now a necessary component of modern home heating systems. Atlantic electric convectors are distinguished from other options by their dependability and feature-rich design. These convectors offer a useful solution that blends in perfectly with any type of home, whether you’re looking to heat a small space or a larger one.

But it’s crucial to use your Atlantic electric convector correctly if you want to get the most out of it. When a device is used properly, it not only guarantees peak performance but also prolongs its lifespan and lowers energy costs. We’ll go over the essential guidelines and recommended procedures for operating your Atlantic electric convector in a secure and efficient manner in this post.

By adhering to these recommendations

Operating tips

Set the heating control switch to the MAX position. If the air temperature in the room drops below the maximum level marked on the scale of the device, the sensor will be triggered, activating the operation of the heating element. Electronic thermostat in some devices will give a signal V1. If the temperature does not cross the mark, heating is not carried out. After the heater starts working, wait until the room warms up to an acceptable temperature and fix it as the maximum. To do this, smoothly move the thermostat switch to its original position. In previous generation models, you will hear a quiet click, on modern devices the V1 signal will simply go out. Wait for the moment of stabilization of the temperature – this occurs within two three hours. If the conditions obtained suit you, fix the toggle switch in this position. If necessary, the procedure can be repeated to set a new maximum mark.

Each and every electrical safety quality standard "Nf" in categories B and C is met by the heater’s manufacturing process. Details about this are contained in the documents that are attached. IP 24 device protection is combined with safety class II features.

Turning on anti-icing

The temperature will always be kept at seven degrees in this mode. This feature is typically utilized in rooms that are not used frequently. In the event of a return, the program enables you to quickly warm the room while conserving electricity. To initiate, align the matching wheel with the pentagram featuring a snowflake picture and move the slider to the anti-icing position.

Lock the control panel

1. Remove the convector from the bracket and release the pins marked P, most often they are located on the bottom panel of the device.
2. Switch one of the pins to position B. This action locks the thermostat switch.
3. Setting the pin to the L position allows you to limit the movement of the thermostat switch. For advanced models with an electronic control system, move the pin to the n hole.

Economy mode

Only heaters equipped with an electronic thermostat have this feature. When no one is around, you can program the device to keep the desired temperature. Slide the slider to the crescent pentagram to activate. The gadget will automatically enter economy mode and keep the temperature three to four degrees below the thermostat setting.

Programmable mode

Additionally, only sophisticated convectors with electronic control can operate in this mode. These kinds of devices come with a unique cable and remote control. Slide the slider to the clock’s pentagram to activate. The device can now recognize the following commands: "comfort mode," "economy," "anti-icing," and "complete shutdown." The gadget automatically adjusts to the ideal temperature if any of the specified programs is not enabled via the remote control. Transition period of up to 12 seconds.

A few important guidelines must be followed when using Atlantic electric convectors in order to guarantee both safe and effective operation. Keep the space surrounding the convector clear for adequate air circulation, place it away from combustible objects, and routinely inspect it for dust accumulation, which can impair performance. To avoid overheating and potential hazards, always follow the manufacturer’s instructions, keep the unit off of a surface that is unstable, and avoid covering it.

Atlantic’s electric convectors are a dependable and effective way to keep your home at a comfortable temperature. Your convector will run safely and effectively and provide constant warmth during the winter months if you install and use it according to the basic instructions.

It’s crucial to position the convector so that it is away from moisture sources and obstacles. Frequent upkeep and cleaning, like checking the power cord and dusting the unit, will help extend its life and guarantee optimal performance.

You can maximize energy efficiency and maintain a warm environment by making the appropriate temperature adjustments and making use of the timer function. You can continue to benefit from your Atlantic electric convector for many years to come if you comprehend and adhere to these straightforward instructions.

Video on the topic

Convector ATLANTIC F17 DESIGN 2000W PLUG

ATLANTIC electric heating technologies

Day 7. CONVECTOR Atlantic F117, review, test, additional heating of the apartment, consumption.

Atlantic convectors. Model range

How to choose a convector for a summer house? Electric convector Atlantic – experience of use

Atlantic convector CHG-3 PACK0 – switching on.

Instructions for setting up the control of convectors Atlantic F129 ☼ Altis Eco Boost Wi-Fi ☼ Electric

Convector – how to choose? Electric heater Atlantic F125 Design detailed review.