Windows 11 How to boot into Safe Mode

There are situations when Windows 11 starts behaving strangely: it freezes, gives errors, or simply refuses to boot normally. In such cases, the good old tool — Safe Mode — comes to the rescue. This is a special way to start the system, which can be a real lifesaver.

The main feature of safe mode is that Windows loads only the most necessary drivers and services. If the problem was caused by a faulty program or a bad driver, it will most likely not occur in this mode. This allows you to remove the problematic software, check the system for viruses, or simply shut down the computer normally.

Hotkeycontrol

Three types of safe mode

In the menu that appears. this is the simplest of all, in which drivers and third-party applications are not loaded. Since basic drivers will be used, the graphics leave much to be desired, and the icons appear large and blurry. In addition, the words “Safe Mode” will be displayed in the four corners of the screen.

Safe mode with network connection: in addition to the basic graphics drivers, in which case network drivers will also be loaded. This will help you connect to the Internet in safe mode, but it is not recommended to view web pages while Windows is loading in safe mode.

Safe Mode with Command Prompt: when you select this option, only the command prompt will start, not the Windows graphical interface, which means that you will simply see a command prompt window on the screen. This can be used for advanced troubleshooting.

Now that you know the different types of safe mode and can make the necessary choice when prompted, it's time to move on to the possible ways to boot Windows 11 in safe mode.

When using modified versions with shaders, temporarily disable them before adjusting the grip, as shaders can cause compatibility issues.

Step 1: To boot into safe mode, open the “Settings” app. using the search, menu For details on using the program and testing the recovery results (the results are very good), see the separate article Data recovery in Hasleo Data Recovery Free.or key combinations.

Step 2: Go to the section “System”, scroll down the page and click on the tab on the right. “Recovery”.

The screen will list various recovery options, including restarting your PC, returning to a previous version of Windows, and advanced startup.

Step 3: Press “Restart now” next to “Advanced startup options” to enter the Windows recovery environment.

Step 4: Then click “Restart” in the window that appears.

Windows 11 will restart, and the system will boot into the Windows recovery environment.

Accessing Safe Mode from Windows RE (Recovery Environment)

Step 5: In Windows RE, you will have three options on the screen: select “Troubleshooting”.

It allows you to recover files even in some difficult cases, such as after formatting in other file systems. On the screen “Troubleshooting” monitor connection statistics in the bottom panel of OBS — green indicators indicate a stable connection, yellow indicators warn of possible problems, and red indicators indicate critical errors that require immediate intervention. If problems arise, use the built-in OBS statistics to diagnose the causes of frame drops or connection instability. “Advanced options”.

Step 7: You will see several options on the screen. Select “Startup Options”.

Step 8: Now, various Windows settings will be listed in the section “Boot Options”in the lower right corner, click “Install as LFX/GFX”.

Step 9: After restarting, you will find the available options listed on the screen numbered from one to nine. Numbers four through six represent different types of “safe mode.” Press the corresponding number keys (4, 5, or 6) or function keys (F4, F5, or F6) to boot Windows in safe mode.

“Ignore everything”

Sometimes your computer starts to glitch, slow down, or not boot normally — and that's when safe mode helps. This is a special mode of Windows in which only the most necessary functions are launched: basic system functions, without unnecessary programs and drivers. It is convenient for finding and fixing problems, such as blue screens or viruses that interfere with your work. In Windows 11, there are several easy ways to enter Safe Mode — for example, through the Start menu or recovery settings — and even a novice can do it.

2. Boot Windows 11 in Safe Mode from the Start menu.

You will not boot Windows directly into Safe Mode, but you will be able to quickly access Windows RE (recovery environment).

Step 1: To enter Windows 11 recovery mode from the “Start”, press the WINDOWS key to open the Start menu, click the icon “Shutdown”, then, while holding down the SHIFT key, press “Restart”.

Step 2: The system will restart in Windows RE. Once there, follow the steps above.

3. Boot Windows 11 in Safe Mode from the login screen

You can also go to Windows Recovery Mode from the login screen that appears when you turn on your computer if you cannot log in to your computer.

Step 1: Quick detection of damaged sectors is available (“Prescan” mode), and it is possible to save the application to a USB flash drive and run it in DOS mode, i.e., without loading the operating system. One of the disadvantages of HDD Regenerator is that it is not free. In demo mode, you can only recover one damaged sector, which is obviously not enough in 99.99% of cases. To recover the entire drive, you will have to pay for the software, and the cost of the full (lifetime) version at the time of writing is $60, which is equivalent to the purchase of a new 2 TB drive. This cost is only justified if the stored device contains the necessary data or if the user owns several drives at once. “Shutdown” in the lower right corner, then, while holding down the SHIFT key, press “Restart”.

Step 2: The system will restart and enter Windows RE. Then follow the steps mentioned earlier to start Safe Mode from the recovery environment.

4. Boot Windows 11 into Safe Mode from the command prompt

Many users prefer to use the command line to perform tasks in Windows. The best part is that you can also boot Windows 11 in safe mode using the command line, although this will only take you to Windows RE. Here's how to do it.

Step 1: To boot into Safe Mode using the command prompt, open“Windows Terminal”menu, right-click on the button “Start” and select from the menu “Windows Terminal”.

Step 2: In Windows Terminal, check which tab is open – “PowerShell” or “command Prompt”. If it is a command prompt, proceed to the next step to execute the command. If PowerShell launches, click the down arrow and select Command Prompt in the drop-down menu.

Note: You can set “Default Profile” as the command line in the terminal settings to run it by default when you open Windows Terminal.

Step 3: After you have launched the command prompt in Windows Terminal, enter the following command and press ENTER to boot into Windows Recovery Mode.

Step 4: You will receive a message that Windows will shut down in one minute. Wait for the system to enter the recovery environment, then follow the steps in the instructions above to boot Windows 11 in safe mode.

4. Boot Windows 11 in safe mode using PowerShell

Step 1: To boot into Safe Mode using PowerShell, find “Windows Terminal” in the Start menu or right-click on the Start button and select “Windows Terminal” from the menu.

Step 2: In Windows Terminal, check that the open tab should be – “PowerShell”.

Step 3: After you launch PowerShell in Windows Terminal, run the following 2 commands in sequence and press ENTER to boot into Windows recovery mode.

Step 4: Wait for the system to enter the recovery environment, and then follow the steps in the instructions above to boot Windows 11 in safe mode.

5. Boot Windows 11 in safe mode by changing the system configuration

All of the methods described above will boot Windows into safe mode once, after which Windows 11 will boot in normal mode. However, if you are troubleshooting and need Windows to start in safe mode every time you reboot the system, you can configure this behavior in System Configuration. In addition, this skips the recovery environment boot and directly starts Windows 11 in safe mode.

Step 1: To boot into Safe Mode by changing the system configuration, press WINDOWS R to launch the window. “Run”, step 5:

Step 2: Then click “OK”, or ENTER to open the window The vise method is the most controlled way to separate the adhesive bond of the case. Vices allow you to apply even pressure along the seam line, minimizing the risk of cracks and chips in the plastic. This method is particularly effective for small power supplies that fit completely within the jaws of the vice. The main advantage of this method is the ability to precisely control the force applied and gradually increase the load until the adhesive bond breaks..

Step 3: In System Configuration, go to the tab “Download” and check the box “Safe Mode” in the “Download Settings” section.

Step 4: Press the button “OK”.

Step 5: Then click “Restart” in the confirmation window that appears.

Method 5: Search for a driver by ID “System Configuration”, uncheck the box R.Saver is a simple free utility in Russian for recovering data from flash drives, hard drives, and other storage devices from the Russian data recovery laboratory R.Lab (I recommend contacting such specialized laboratories when it comes to really important data that needs to be recovered. Various types of multi-purpose computer assistance in this context are almost the same as trying to recover them yourself). and save your changes.

6. Boot Windows 11 in safe mode by forcing it to shut down

All of the above methods only work if Windows boots normally. However, sometimes Windows refuses to boot due to problems. So how do you boot Windows 11 in safe mode in this case?

The process is quite simple. However, it is recommended to use it only if Windows does not boot, as it may damage the system. Every time Windows fails to boot three times in a row, it automatically enters automatic recovery mode, from where you can access the recovery environment.

Step 1: The catch is that you will have to simulate a Windows 11 crash. To do this, turn on your computer and wait for Windows to start booting up. Once it does, press and hold the power button to turn off the computer. You will have to repeat this three times, and when you turn on the system for the fourth time, it will go into automatic recovery mode.

Windows will run diagnostics and attempt to fix the problems.

Step 2: Select the Standard tab. If you have multiple hard drives, select the desired hard drive on the right side of the window with the left mouse button, in our case WDC WD5000AAKS-00A7B2 “Additional parameters”, to enter Window RE.

Step 3: Once in the recovery environment, you can boot Windows 11 in safe mode, as discussed earlier.

7. Boot Windows 11 in safe mode from a bootable USB device

Ctrl+O You can launch a file with the extension you are studying by dragging the object from All three of these actions will open the document launch tool. In the window, navigate to the area of the hard drive where the desired file is located. Select this object and click on

Method 3: OpenOffice The contents of the document will be displayed to the user through the Writer shell.

“Open” Which has the form of a folder and is located on the toolbar.

“Images and files stored in cache”

Step 4: Click on the icon These operations will open the object launch tool, further operations in which have already been described earlier when considering options for launching via the LibreOffice startup shell. download OpenOffice for free

Step 5: OpenOffice is considered a competitor to LibreOffice. It also has its own word processor, which is also called Writer. However, unlike the two options described above, it allows you to view and edit DOCX content, but you will have to save it in a different format. “Open” if you have already launched Writer, you can also open the file through the internal shell of this program.

Launch the package's startup shell. Click on the name Then, from the three options presented on the screen, select “Search and Troubleshooting”.

Step 7: In the additional settings, select Explorer.

Step 8: A command prompt with elevated privileges will start. Then enter the following command and press ENTER.

“File” “Open” “Continue”.

Windows 11 will now boot into Safe Mode every time you turn on your computer, unless this setting is changed in “System Configuration” or “Command Prompt”.

Now you know how to boot Windows 11 in Safe Mode, whatever the problem may be.

So now you know several ways to enter Windows 11 Safe Mode. It's not as difficult as it might seem at first glance, especially if the system still boots up somehow.

Remember that safe mode is your main helper in dealing with problems. It allows you to roll back drivers, remove interfering programs, or simply run diagnostics when normal startup is not possible. Don't be afraid to use it if your computer starts acting strangely.

We hope these instructions have helped you figure it out. If one method didn't work, just try another. The main thing is that you now know where to click to regain control of your system.