Learning how to disassemble an Ariston washing machine. The best tips for repairing Hotpoint washing machines

While disassembling a washing machine may seem like a difficult undertaking, it is completely doable on your own with the correct instructions. Knowing what to do when servicing a washing machine—whether it’s a Hotpoint or an Ariston—can help you save time and money.

This post will guide you through the disassembly of an Ariston washing machine, providing helpful hints at each stage. Additionally, you’ll find helpful guidance on fixing typical problems with Hotpoint models, ensuring that your machine functions properly once more.

You’re in the right place if you’ve ever wondered how to begin doing washing machine repairs. Let’s explore the top hints and techniques to support you on your journey.

Necessary tools

Prior to learning how to disassemble an Ariston Hotpoint washing machine, get the necessary tools ready.

• a set of screwdrivers (cross and flat);
• a set of keys;
• you will need open-end wrenches (8 and 10) separately;
• a chisel;
• a hammer;
• pliers;
• a hacksaw for metal;
• nippers;
• a flashlight.

Preparatory stage

De-energizing and unplugging the machine from the network is the first step in disassembling an Ariston washing machine. Next, carry out the following steps:

1. Be sure to close the tap of the cold pipe that supplies water.
2. Move the unit away from the wall and furniture so that it can be conveniently approached from any side.
3. Remove the nut securing the inlet hose. It should be removed because the back panel is also removed during disassembly.
4. Also, disassembling the Hotpoint Ariston washing machine involves preliminary dismantling of the drain filter. It is located below, right behind the hatch. Therefore, the hatch must be opened by removing the clamps. Put a low container under it, unscrew the filter.
5. If necessary, clean it from foreign deposits, rinse under running water.

Removing the cover and front panels

The primary portion of the instructions on how to take off the Ariston washing machine’s top cover now starts. The front panels and cover need to be removed. The following is the order of events:

1. To remove the top cover, take a screwdriver or Allen key and unscrew the bolts.
2. Then it is carefully pushed in the direction opposite to the person, lifted up a little and removed. As a result, the view will open approximately to the following picture.
3. Pull out the tray – to do this, press the latch in the center (usually it is blue) and carefully pull the part towards you, simultaneously rocking it left and right.
4. Next, you need to understand how to disassemble the Hotpoint Ariston washing machine to remove the front top panel. Find the screws behind the tray (behind the part).
5. Press the plastic latches using a flat screwdriver. At this stage, it is recommended to take a photo of the wires so that they can be easily reassembled.
6. Disconnect the contacts and remove the panel. Some models have a special hook for hanging them. In this case, the method of how to disassemble the Hotpoint Ariston washing machine is simplified.
7. If you need to remove the tank, move on to the cuff – you will need to remove the clamp from it by prying it with a screwdriver. The cuff is conveniently tucked inside the tank.

Dismantling parts in the rear

Disassembling the components that are found at the back of the Ariston washing machine is the subject of the following step in the instructions.

The following is the order of events:

1. Visually find the motor – it goes right under the tank.
2. Disconnect all the wires that go to it.
3. Unscrew the bolts that secure the motor (usually there are 4 of them).
4. Carefully swing the motor back and forth, pull it up.

You must know how to remove the heating element from a Hotpoint Ariston washing machine before you can dismantle it. Take out the heating element, disassemble the wires and terminals that lead to it, and clean it if needed to accomplish this. You will need to install a new sealing rubber during assembly if you need to remove it from the socket.

The process for taking out the drain pump is then explained in the manual for disassembling the Hotpoint Ariston. As is customary, the unit must first be positioned so that it is accessible from the left (if you are looking at the door). The following is the algorithm:

1. Remove the screws that secure the bottom cover (some models do not have one, then this step is skipped).
2. To disassemble the Ariston washing machine with your own hands, you should unscrew the screws that secure the filter in front.
3. Then, when the fastening loosens, carefully push the filter, and it falls into your hand along with the pump.
4. Next, take the pliers and unbend the clamp that secures the drain pipe (it needs to be separated from the pump).
5. Unscrew all the bolts that connect the pump to the filter.

Dismantling the parts in the upper part

Follow these steps when following the instructions to disassemble the Ariston washing machine’s drum and other components:

1. Unclamp the connector of each wire that leads to the temperature sensor and filter.
2. You also need to dismantle the pressure hose from the sensor.
3. Remove each part – for this, it is enough to unscrew the screws. This is a fairly simple step – no more difficult than the method of removing the cover of the Ariston washing machine.
4. The sensor hose should also be disconnected from the tank, because it can be damaged during operation. Since it is attached with plastic clamps, it is enough to cut them off using nippers.

How to remove counterweights

We can say that the Hotpoint Ariston washing machine’s disassembly is finished with the aforementioned steps. However, it’s also important to outline how to take the counterweights out. They are fastened in many devices with basic fasteners that are easy to disassemble.

However, because Ariston employs a unique kind of fastener, things are more difficult in this instance. They require a unique key, which needs to be ordered in advance, to be removed.

You can disassemble the racks once each counterweight has been removed. Because they are fastened with plastic rods, the work will be simpler in this instance. Press the latches and pull the rod toward you with pliers to disassemble.

Although disassembling a Hotpoint or Ariston washing machine can seem overwhelming, it can be done easily with the correct help. By closely adhering to the instructions, you can confidently handle common problems and possibly reduce the cost of repairs.

To ensure a seamless reassembly, always work methodically and keep track of all screws and parts. Never be afraid to ask for professional assistance if you run into any difficulties or have questions about a specific step. Your first concern should always be safety.

You can prolong the life of your washing machine and save money by replacing it less frequently with practice and patience. Not only does DIY repair feel satisfying, but it also expands your repertoire of useful home maintenance skills.

While disassembling an Ariston washing machine and fixing Hotpoint models may appear difficult, they can be handled with the correct advice and direction. You can save time and money by using the step-by-step instructions in this article to confidently disassemble these machines, troubleshoot common problems, and carry out necessary repairs.

Video on the topic

📢How to remove the tank of the Hotpoint Ariston washing machine❓👍

how to disassemble the Hotpoint Ariston washing machine

How to disassemble a washing machine? | Washing machine repair for beginners from scratch

ARISTON WASHING MACHINE REPAIR (replacing bearings)